Kandou Bus, S.A., the world’s highest performance and lowest energy SerDes technology company, has announced that it has completed a $15M investment with Bessemer Venture Partners. The resources will enable Kandou to expand research and accelerate the development, productization and deployment of Kandou’s Chord™ signaling SerDes technology. Kandou has developed Chord signaling for enhanced communications between chips inside electronic systems ranging from cell phones to servers and high performance computing.Read more
Kandou Bus has announced that their Glasswing™ GW28-125-USR interface macro that has been manufactured, tested and characterized, is compliant to the newly published JEDEC specification, JESD247. Titled the “Multi-Wire, Multi-Level Interface Specification”, this new specification was published by the JEDEC standards development organization in June. Kandou actively participated in the effort to define this interface, and David Stauffer of Kandou served as the chair of the JEDEC task group that produced the text. As an active JEDEC member and in full compliance with membership terms and conditions, Kandou has committed to adhere to the RAND, Reasonable and Non-Discriminatory, terms of the JEDEC standards body for the licensing of the Kandou patents to that are needed to implement this interface.
Kandou Bus announced today that their Glasswing™ chip-to-chip link technology has been licensed by Marvell Technology Group for use in a variety of future multi-chip products. Based on Kandou’s CNRZ-5 Chord™ signaling architecture, Glasswing delivers high bandwidth signaling at very low power and is ideally suited for short links inside and outside a package. Glasswing is the world’s first SerDes proven in silicon that is capable of delivering 1Tbps bandwidth at <1 watt, paving the way for fundamental architectural shifts in power savings in devices ranging from cell phones to enterprise and high-performance computing platforms.Read more
David Stauffer of Kandou will speak at the OFC Market Watch session entitled “OIF CEI 56G: Signal Integrity to the Forefront.” Dr. Stauffer serves as the Chair of the Physical and Link Layer (PLL) Working Group of the Optical Internetworking Forum (OIF) and is a lead design engineer for Kandou Bus with more than 30 years of experience at Kandou and IBM. He will speak with three other OIF leaders in a panel discussing the development of the new OIF CEI-56G specifications on Tuesday, March 22 at 10:30- 11:30 AM in Expo Theater II, Exhibit Hall B of the Anaheim Convention Centre.Read more
Kandou Bus announced today that David Stauffer of Kandou will speak at the OIF “100G Serial Electrical Links and Beyond” workshop. Dr. Stauffer serves as the Chair of the Physical and Link Layer (PLL) task force of the Optical Internetworking Forum (OIF) and is a lead design engineer for Kandou Bus with more than 30 years of experience at Kandou and IBM. He will speak alongside seven other industry leaders on Thursday, March 24 at 12:30- 6:30p.m. at the Anaheim Marriott, across the street from OFC.Read more
SAN FRANCISCO, January 27, 2016 – – Kandou Bus has announced that it will present two papers and demonstrate its Chord Signaling™ link technology at the 2016 International Solid-State Circuits Conference (ISSCC). In a technology demonstration, a paper presentation and a forum presentation at the conference, Kandou will detail its innovative coding-based signal interface, which significantly outperforms existing I/O solutions.Read more
Cadence Design Systems, Inc. (NASDAQ: CDNS) today announced that Kandou Bus has fully tested and characterized a 28nm high-speed SerDes PHY IP design named, “Glasswing,” that was implemented using the Cadence® mixed-signal signoff flow. Silicon results confirm that the design can deliver up to 25Gbps per data bus bit, enabling a throughput of 125Gbps over the interface. These specs were achieved while Kandou also reduced dynamic power by 3-5X.Read more
Kandou Bus will present a paper at DesignCon 2016 that will propose a method for increasing the useful channel spectrum in a multi-drop bus. In a presentation by Ali Hormati, Research Engineer, Kandou will introduce a signaling scheme that delivers significantly more bandwidth than conventional single-ended and differential methods.Read more
LAUSANNE, SWITZERLAND, January 13, 2016 – Kandou Bus will present a paper at DesignCon 2016 that will compare the sensitivity of PAM4 and Ensemble NRZ (“ENRZ”) to inter-symbol interference (“ISI”). In a presentation by Ali Hormati, Research Engineer, Kandou will address why PAM4 is highly susceptible to ISI and how ENRZ 4-wire signaling exhibits the same tolerance to ISI as NRZ differential signaling while delivering a higher bandwidth link.
Demonstrated in Glasswing™ Test Silicon and Ideal for Chip-to-Chip Links Inside a Package.Read more